Efficient Ways To Repair A Fishing Rod

A damaged or broken fishing rod might create problems in casting and ruin your fishing experience. It’s better to repair it immediately. There can be several reasons for damage and issues. They can be related to reel, to spooling ability, to guide or line of the rod. It is important to indicate them properly and fix the issues to catch big fishes on your journey.

Tackle With Rod Issues
Tackle With Rod Issues

Common Fishing Rod Issues And Solutions

There are several ways in which your rod might get damaged, and you need to repair it. Here are some solutions in this regard.

Fishing Reel 

A fishing reel is an essential component of the rod that ensures the casting in the best way. First of all, you need to check the intensity of the damage. If it is slightly damaged, you can repair it quickly. Otherwise, you might need to buy a new reel. You can have a look at the guide to buying a fishing reel. Also, checking for coupons will be a good idea to save on fishing reel.

If your reel is not moving up or down or is having issues in movement, it will be best to counterclockwise movement of the cover and then remove it to examine the spool. Make sure to check the brushing part properly. You can also look at the cast bail mechanism for the best fix.

Rod Tip

If the tip of your rod is broken or fallen off, replacing it immediately will be the best idea. If your old tip is broken to some extent but removed completely, it will be best to take it out entirely and replace it with a new one.

Buying a new fishing rod tip isn’t expensive. It hardly requires a few bucks, and you can get further discounts on rod tips through coupons. If you’re facing issues in removal, slide it off gently by using pliers. Then make necessary adjustments while adding the new one and ensure that it is in a straight line.

Line Guide

There are several issues associated with the line guide as well. Sometimes, it’s improper insertion causes issues. If the line guide is broken, you’ll need to get a new one to continue your fishing trip without any hassle. They’re pretty cheap and you can get deals on the line guide for saving.

But if there are issues in insertion and adjustment, you can fix them quickly. First of all, remove the guide without causing any damage. You need to pull it out and insert it again in the correct way to ensure the best casting experience. You can also break the thread that was used for security and add a new thread later. Make sure that it sits perfectly on the rod. For some types of rods, dental floss also serves the best. You can tie the slip knot and use the glue to cinch it. Repeat the process and add glue in the end again for proper security. 

Take Care Of Accessories
Take Care Of Accessories

Whipping 

If you’re unable to indicate the issue in your rod, try the whipping process. The whipping will help strengthen the ferrule part. Hence, it won’t break when you are casting for catching a fish. You can also try it to keep the hook keeper and guide in place. Do it by using the rod shaft and properly wind a thread around it to prevent any issues.

In the end, you can also use the clear lacquer or resin as a coating. The finished process will help in enhancing the experience while fishing. Also, it will strengthen the other parts of the rod and make them ready for casting.

Hook Keeper

If the hook keeper of your rod is fallen and facing any issues, you can easily replace it. Try to get a new one from a local store, and you can check for hook keeper coupons for savings. Unfortunately, it is pretty difficult to repair once it is damaged. You can easily place the new one above the reel seat on the backside of the blank rod for the best fishing experience.

Summing Up

That was all about ways you can use to repair a fishing rod. There are specific issues that might be associated with your rod, and you need to fix them for proper casting. Make sure to indicate them well for the best experience.