How to Drill Into Concrete? 8 Tips To Follow

Concrete is a material used in construction to create sidewalks, foundations, and many different types of buildings. It’s strong enough to stand up against the harshest weather conditions, and it lasts for a long time without breaking down or deteriorating. 

But when drilling into concrete, there are some things you need to know before going at it with your drill. Otherwise, you might end up damaging the surface or causing cracks that will cause problems later on. In this blog post, we’ll cover some tips that will help make sure your drilling goes well!

Drilling Into Concrete
Drilling Into Concrete

Use Masonry Bit

Use a hammer drill with a masonry bit. A regular electric drill may work as well, although it will take longer and be more difficult. Using the right tool makes all the difference if you’re going to be drilling into concrete. You can save on masonry bit through coupons.

Use The Right Masonry Bit

Use the right masonry bit for the job. It ensures that your drill won’t seize up during operation and will allow you to get through faster than if you were using a regular drill or the wrong type of bit. Check for coupons on drill bits for savings.

Do Correctly

When in doubt, hire out! If you feel like this may be more complicated than it sounds, don’t take any chances by trying yourself only to end up having major issues finding someone else who can do it correctly instead. It costs some money upfront but could save hundreds down the road on repairs which are ultimately even more costly. 

Don’t Leave Marks

Use a hammer drill that won’t leave any marks on your concrete or surface. If you don’t buy the right kind of hammer drill, it will end up leaving big dents on your floor and could even breakthrough if you press down too hard while drilling. You can check for deals on hammer drills for savings.

Drill At Low RPMs

Drill at low RPMs for deep holes so you can avoid cracking the concrete as much as possible without reducing power output significantly, which would only serve to slow down progress anyway. 

  • It comes with practice, though, since there are many factors involved, such as how fast you should be moving forward when drilling into concrete, depending on the size of your drill bit.
  • Make sure your drill is at the correct speed for maximum impact, but not so fast that you burn out the bit or make it too hot to touch.
  • Typically this would be around 300 RPMs on a standard cordless drill set on low-speed mode.

Use Safety Equipment

Use safety equipment such as eye protection and earplugs when drilling into concrete because it involves loud noises, dust flying everywhere, and sparks, so you’ll want to protect yourself at all costs here! Check for discounts on earplugs for savings.

Repair Small Holes First

The small holes will be repaired first before larger ones are fixed. There may not be enough time or resources on hand for both jobs if they need to get done right away rather than later on down the road. If smaller holes can wait until after a giant hole has been patched up, no one needs more damage than necessary, which would only worsen. 

Proper Angles

Angle your drill down on a diagonal to maximize the strength of the drilling bit’s impact with each strike. Also, use strong force downwards to avoid losing momentum from such high RPMs (revolutions per minute). If you’re using cordless drills, there will be enough power in reserve. 

If they are fully charged or plugged into an outlet nearby if necessary for backup purposes, it’ll be in the case. With most standard bits made for home improvement jobs. However, it shouldn’t take more than half a dozen slow-paced minutes at best before achieving penetration through even extra dense concrete surfaces.

Ensure Proper Angles
Ensure Proper Angles

Bringing It All Together

Concrete is a rigid material to drill into. It’s not impossible, though, and there are many different strategies that you can use to make the process easier. Be sure to follow our tips for successfully drilling into concrete. You can also check for tips to use a power drill for further help.