How to Maintain a Brick Floor? 5 Tips To Follow

Brick floors are a beautiful addition to any home, but they can be tough to maintain. This blog post will cover several tips that will help you keep your brick floor looking great for years to come. You’ll learn how to sweep and vacuum the floor properly, take care of spills, seal the bricks from moisture damage with a clear coat finish, and more!

Maintain a Brick Floor
Maintain a Brick Floor

1. Keep Your Brick Floor Clean

You need to sweep or vacuum the floor regularly.

Some brick floors are very porous and can be challenging to clean with a mop. So if you have one of those types of floors, sweep it often to keep up on any dirt that has settled into the bricks over time. 

Please don’t use a lot of water when mopping as this will cause your bricks’ pores to expand, which will allow more dust and other particles in between them, causing damage over time. Instead, avoid using too much moisture by only dampening your mop slightly before wiping across the surface area being cleaned. This way, any soap residue is not sticking around long enough to become an issue later on down the road, either! You can save on cleaning supplies through coupons.

2. Use The Right Cleaning Materials

If you have a more porous brick floor, consider using vinegar and water instead of harsher chemicals to clean it with, as this will help prevent further damage from being done over time. When mopping your floors, you can also use soft sponges or mop pads, so they don’t scratch up your bricks, causing them to lose their luster. Check for discounts on soft sponges for savings. 

For tougher stains on non-porous surfaces, try using warm water, baking soda, dish soap, and either an old toothbrush or scrub brush! After about ten minutes, rinse away any residue, then dry off immediately after wiping down the surface area again, but only once all excess moisture has been removed!

3. Seal Your Brick Floor

If you have noticed that water is sitting on top of or causing damage to the bricks, it might be time for some sealing! Sealants are extremely beneficial for all sorts of surfaces but especially so when it comes to brick floors! Check for deals on sealants for savings.

They help prevent stains from settling in a while and add some shine and luster back into the surface area. Plus, after sealing, you won’t have to worry about your bricks getting dirty or stained nearly as quickly either, which will save you quite the headache down the road! Just be sure that whatever product you decide to use has been tested out on masonry first.

Use of sealant
Use of sealant

4. Don’t Use Oil-Based Products

Oil and water don’t mix, so avoid using any oil-based product on your brick floor! It could cause the oils in these products to seep into the bricks causing damage over time. It is best to stick with what works for other natural stone materials such as marble or limestone when it comes to cleaning them too! 

Only use a non-abrasive cleaner that won’t scratch up your surface area and ensure there isn’t anything left behind after rinsing out all residues, which might lead to further issues down the road.

5. Dry The Floor Properly

Avoid using a broom for regular cleaning. Brooms can scratch the surface of your brick flooring, especially if you have an extremely smooth finish to it.

Instead, use a dust mop or wet-dry vacuum cleaner with care as they are more gentle on the floor and allow you to pick up heavier debris without scratching the surface.

While you’re at it, make sure to dry the floor thoroughly after every mopping session! If there are still visible damp spots left behind, this will lead to higher chances of mold development and accumulation over time, which you’d want to avoid.

Summing Up

No one likes a dirty or stained floor. Whether you have hardwood, tile, carpet, or brick floors in your home, there are many ways to maintain them, so they stay clean and look their best. Follow our tips for maintaining a brick floor. You can also check the guide to marble flooring for further help.